Dulcimer Kits

12/11 Size

15/14 Size

For more information about dulcimer kits, watch our video here:

The pin blocks, sides and internal braces are made of hard maple. The back is 1/4" birch plywood. The top/soundboard is 1/4" African mahogany plywood. The bridges are also of hard maple. All wooden parts are carefully cut to provide a precise fit. Detailed directions provide many diagrams and step-by -step instructions. All hardware, including music wire and pins, is included. The only supplies needed are glue and finishing materials. Minimally, an electric drill, clamps, and basic woodworking skills are needed to successfully complete your hammer dulcimer.

12/11 Size
$ 195.00
15/14 Size $ 255.00

Dulcimer Stand Kits

We offer 2 sizes of dulcimer stand kits. The Tall Stand Kit holds the front edge of the dulcimer 37” off the floor. This is a good height for playing while standing up. The Short Stand Kit holds the front edge of the dulcimer 25” above the floor, a good height for playing while sitting down.

These stand kits are build of soft maple. They are amazingly sturdy and lightweight and hold virtually an size of dulcimer. They are very portable, weighing about 5 pounds and, when assembled, folding up to just 3” x 2” x 46” for the tall or 3” x 2” x 34” for the short stand.

Short Stand Kit $ 45.00
Tall Stand Kit $ 49.00

Builders Supplies
Music Wire
75 Foot Coil    
  .015 coil (#5) $ 7.50
  .016 coil (#6) $ 7.50  
  .018 coil (#7) $ 7.50  
  .020 coil (#8) $ 7.50  
  .022 coil (#9) $ 7.50  
  .024 coil (#10) $ 7.50  
       
  1 Pound Spool    
  .016 Spool (#6), 1428 ft $ 20.00  
  .018 Spool (#7), 1136 ft $ 20.00  
  .020 Spool (#8), 918 ft $ 19.50  
  .022 Spool (#9), 757 ft $ 19.50  
  .024 Spool (#10), 636 ft $ 18.75  
       
Nickel wound strings, loop end, 45" long, each
  0.022 $ 1.50  
  0.024 $ 1.50  
  0.026 $ 1.50  
  0.028 $ 1.50  
       
Zither (harpsichord) tuning pins, .198 x 1-5/8", nickel plated
  each $  0.30  
  per 500 $115.00  
       
Hitch pins, .146 x 1-1/4", nickel plated
  each $ 0.15  
  per 100 $ 8.00  
       
Delrin, 1/8" round bridge cap (saddle)
  black, per foot $ 1.25  
  white, per foot $ 1.25  
       
Tuning Wrench
  L Shape Black plastic handle, Square head $  7.00  
  T Shape, Star head $ 15.95  
  Gooseneck, Star head $ 23.95  
       
Cases (see Accessories for description)
  12/11 size (fits 38" x 15" x 3-1/4" size dulcimer) $ 92.50  
  15/14 size (fits 41" x 19" x 3-1/4" size dulcimer) $ 98.00  

Home | Hammered Dulcimers | Kits & Supplies
Accessories | How To Play
About Dulcimers | Other Instruments
About Grassroots | Contact Grassroots | Place Order



Website Design & Hosting by Corporate Web Services Inc.

©MMI, Grassroots Hammered Dulcimers, all rights reserved.
Any use without the written permission of Grassroots is strictly prohibited under US and International copyright laws.